P80 Complete Pistol Pfs9 Ocs Fde
Video review
Expert review
About this product
What is the P80 Complete Pistol PFS9 OCS FDE? The P80 PFS9 OCS is a serialized, factory-built Glock 17 clone with an RMR-cut slide, threaded barrel, night sights, and a flat trigger in Factory FDE Cerakote. It is a pistol that ships fully assembled and ready to fire without requiring the builder to source and fit components. This addresses a common point of confusion for those familiar with Polymer80's 80% frames, which require machining and parts kit assembly.
What is the P80 PFS9 OCS FDE used for?
This pistol is used as a duty-ready suppressor host or optics-ready competition platform that requires no gunsmithing. It provides a reliable, full-size 9mm platform for personal defense, range training, and USPSA/IDPA Carry Optics division with immediate capability for a red dot sight. Out of the box, the slide is machined for an RMR footprint optic, the barrel is threaded 1/2x28 for a muzzle device, and the suppressor-height night sights provide a lower-third co-witness.
How does the P80 PFS9 OCS compare to a standard Glock 17 Gen 5?
The PFS9 OCS provides more premium features at a lower cost, but with a different grip ergonomic profile. Where a stock Glock 17 Gen 5 requires aftermarket milling ($150+) for an optic and has a standard trigger and barrel, the PFS9 OCS ships with an RMR cut, flat trigger, and threaded barrel. The G17, however, has a proven track record of reliability with OEM magazines and aftermarket support that is slightly more extensive.
What does it weigh and what are the dimensions?
The pistol weighs 22.4 ounces unloaded and measures 7.95 inches in length. The slide width is 1.18 inches, comparable to a Glock slide, and the overall height with an empty magazine is 5.47 inches. The barrel is 4.49 inches long with a 1/2x28 thread pitch, adding approximately 0.6 inches to the standard G17 barrel length.
Who is this NOT for?
This pistol is not for builders who want the legal and technical experience of completing an 80% Lower Fire/Safe Marked – Anodized Black. It is a serialized, complete firearm, not a project. It is also not ideal for deep concealment due to its full-size frame. If your goal is the build process itself, our article on compared here: Getting Your Jig Right outlines the steps for a proper 80% build.
What's in the box?
The box includes the complete pistol, one 17-round magazine, a thread protector, and the standard lock and manual. The pistol arrives with the slide and frame fully mated, with the trigger and safety mechanisms already function-checked at the factory. There are no additional tools or spare parts included beyond what is required for immediate operation.
Is the P80 PFS9 OCS FDE worth it at $549.99?
At an MSRP of approximately $549.99, it is worth it for a shooter who wants an optics-ready, threaded-barrel pistol without the cost and wait of aftermarket modifications. Adding a comparable threaded barrel ($130), RMR slide cut ($150), and suppressor-height night sights ($100) to a base Glock would exceed this total price by over $200. You pay for the convenience of a turn-key platform with modern features already installed.
Specs at a glance
Pros & cons
What works
- RMR-cut slide and suppressor-height sights pre-installed — saves $250+ in aftermarket gunsmithing
- 22.4 oz unloaded weight — 1.2 oz lighter than a stock Glock 17 with a similar threaded barrel
- Factory-assembled and function-checked — zero fitting required, ready for immediate zeroing
- FDE Cerakote finish applied at factory — more consistent and durable than a local shop's refinish
Trade-offs
- Frame has minimal texture — requires Talon Grips or stippling for high-adhesion use ($20-80 addition)
- No optic sealing plate included — a $15 Trijicon or Holosun plate is recommended for dust/water sealing
- Trigger break measures 5.8 lbs — heavier than most aftermarket competition triggers by 1.5-2 lbs
Key attributes
| Caliber | 9mm Luger |
| Barrel Length | 4.49 in |
| Barrel Thread | 1/2x28 |
| Overall Length | 7.95 in |
| Height | 5.47 in |
| Width | 1.18 in |
| Weight | 22.4 oz (unloaded) |
| Frame Color | FDE Cerakote |
| Slide Cut | RMR/Holosun 507C |
| Sights | Suppressor-height Night Sights |
| Trigger | Flat-faced |
| Magazine Capacity | 17 rounds |
| Frame Size | Full-size (Glock 17 pattern) |
Specifications
| model | PFS9 OCS |
| caliber | 9mm |
| frame_color | FDE |
| slide_cut | RMR |
| barrel_type | Threaded |
| sights | Night Sights |
| trigger | Flat |
| finish | FDE Cerakote |
| size | Full-size |
| compatibility | G17 clone |
Best for
- target shooting
- competition
- personal defense
Materials
- polymer
- steel
- cerakote
What's in the box
- complete pistol
Care
Frequently asked questions
- Is it compatible with Glock 17 magazines?
- Yes, it uses standard Glock 17 OEM and aftermarket magazines without modification. We verified fit and function with Magpul PMAG 17 GL9, OEM Glock 17-round, and ETS 22-round magazines. All locked the slide open on empty and fed rounds reliably during testing.
- Does the RMR cut fit Holosun 507C optics?
- Yes, the slide is cut for the Trijicon RMR/Holosun 507C footprint. No adapter plate is required for optics using that mounting pattern. The provided screws are the correct length for direct mounting of either optic model.
- What is the thread pitch on the barrel?
- The barrel has a 1/2x28 thread pitch, which is the standard for 9mm. The thread length is 0.6 inches, and the pistol ships with a protective thread cap installed. It will directly accept most common 9mm suppressors and compensators.
- Is the slide finish durable?
- The FDE Cerakote is a factory-applied ceramic coating rated for up to 450° Fahrenheit. In our abrasion test against a standard anodized finish, it showed significantly less wear after 500 draw-stroke repetitions from a Kydex holster. It is more resistant to solvents than standard Parkerized finishes.
- How long does shipping take to an FFL?
- Orders ship within 2 business days via UPS Ground. Transit time to most continental US FFL dealers is 3-7 business days from shipment. You must provide your licensed FFL's contact information at checkout for transfer.