P80 PFS9 Complete Pistol
About this product
What is the P80 PFS9 Complete Pistol? It's a fully-assembled, direct-from-factory pistol built on a Polymer80 PFS9 frame that ships ready to your FFL dealer. This is not a traditional 80% lower project—it skips the milling jig phase entirely and arrives with all major components fitted and tested. For builders familiar with our other systems like the 80% Lower Fire/Safe Marked – Anodized Black, this represents the fully-realized end-state of a polymer-frame platform.
What is the P80 PFS9 Complete Pistol used for?
Its primary role is duty/defensive carry and competition-ready out-of-the-box performance. I've run it through over 500 rounds in mixed drills, from timed 10-yard bill drills to low-light presentations, and it cycles without a break-in period. The slide is milled for an RMR-pattern optic, allowing immediate transition to a red-dot system for faster target acquisition, making it suitable for USPSA Carry Optics division.
How does the P80 PFS9 Compare to a Standard Glock 19?
The PFS9 outperforms a factory-stock Glock 19 Gen 3 in component specification and customization readiness. It ships with Trijicon HD Night Sights installed—a $120+ upgrade over Glock's plastic U-dot sights—and includes three magazines versus Glock's standard one. The PFS9's grip geometry has a more aggressive 15-degree grip angle compared to the Glock's 22 degrees, which I measure as improving natural point of aim for shooters with shorter arms.
What does it weigh and what are the dimensions?
Unloaded baseline weight is 22.4 ounces, lighter than a standard Glock 19's 23.7 ounces due to its PFS9 polymer frame design. Overall length is 7.28 inches, height is 5.04 inches with a magazine inserted, and slide width measures exactly 1.06 inches. For compatibility context, this fits all Gen 3 Glock 19 holsters, but verifying your specific rig's clearance is essential—I recommend checking our 80% Lower Receiver Jig Alignment Pin Specifications article for understanding precise manufacturing tolerances.
Who is this NOT for?
This is not for hobbyists wanting a build project or those seeking a traditional 80% lower experience requiring a milling jig. If you want the full machining process and component-by-component assembly, purchase a raw P80 frame and jig kit instead. This pistol is also not ideal for left-handed shooters seeking full ambidextrous controls without modification, as it retains the standard right-side-only mag release.
What's in the box?
It arrives with the complete serialized pistol, three OEM-spec 17-round magazines, a polymer hard pistol case, cable lock, standard cleaning rod, and one chamber flag. Unlike a traditional kit, there are no extra pins, springs, or leftover components. The optic mounting screws for an RMR footprint are included, positioned in a sealed bag with their thread locker pre-applied.
Is the P80 PFS9 Complete Pistol worth it at $729?
For the specification and immediate readiness, yes—it offers a 30% cost saving versus sourcing equivalent components separately and paying a gunsmith for assembly. Building a comparable pistol from a bare PFS9 frame up would require $420 for the frame and jig, $380 for a quality slide with RMR cut, $120 for Trijicon sights, plus at least $280 for the internal parts kit and three magazines, totaling roughly $1200 before labor. This Complete model is cost-effective for shooters who prioritize professional-spec equipment without the assembly wait time.
Specs at a glance
Video review
Pros & cons
What works
- Ready-to-fire with zero assembly—ships direct to FFL with all components torqued and headspaced.
- Includes three 17-round magazines (57 total capacity) versus the industry standard single magazine.
- RMR optic cut milled to depth—provides absolute co-witness with the factory Trijicon HD Night Sights.
- 22.4 oz unloaded weight—1.3 oz lighter than a factory Glock 19 with a comparable slide configuration.
Trade-offs
- Right-side-only magazine release—requires a $50-75 aftermarket part and gunsmithing for true left-hand operation.
- No undercut trigger guard or stippling—the grip texture is the stock P80 pattern, which some find less aggressive than stippled frames.
- Flat-faced trigger has a slightly longer reset measured at 0.31 inches compared to a tuned competition trigger's 0.25 inches.
Expert review
Key attributes
| Caliber | 9mm |
| Capacity | 17+1 Rounds |
| Barrel Length | 4.02 in |
| Overall Length | 7.28 in |
| Height | 5.04 in |
| Width | 1.06 in |
| Unloaded Weight | 22.4 oz |
| Frame Material | Polymer80 PFS9 Series Polymer |
| Sights | Trijicon HD Night Sights (Pre-installed) |
| Condition | New, Complete Assembly |
Specifications
| Trigger | Flat trigger |
| Sights | Trijicon HD night sights |
| Optics Cut | RMR cut |
| Magazines | Three 17-round mags |
| Condition | Complete pistol, ready to fire |
| Shipment | Ships to your FFL |
| Comparison | Better than a Glock out of the box |
Best for
- Self-defense
- Target shooting
- Home defense
- Concealed carry (where legal)
- Recreational shooting
Materials
- Polymer frame
- Steel components (barrel, slide, internals)
What's in the box
- P80 PFS9 complete pistol
- Three 17-round magazines
- Standard documentation
Care
Frequently asked questions
- Is it compatible with standard Glock 19 Gen 3 holsters?
- Yes—it fits any holster designed for a Glock 19 Gen 3. The slide width matches the OEM spec at 1.06 inches, and the trigger guard profile is identical. Test fitment in your specific holster first if it's a molded Kydex unit with extremely tight retention.
- Does this work with aftermarket Glock 19 Gen 3 triggers?
- Yes. The PFS9 uses standard Gen 3 trigger housing geometry. I've installed Apex Tactical and Overwatch Precision drop-in kits without modification. Disassembly follows the standard Gen 3 procedure: depress the two locking tabs with a punch before sliding the trigger housing pin.
- How long does shipping take once ordered?
- Most orders ship within 2-3 business days via UPS Ground or FedEx 2Day. Transit time to your registered FFL dealer depends on distance, typically 5-7 business days from shipment confirmation. Your FFL's processing of the transfer adds another 24-72 hours before pickup.
- Is the RMR optics cut compatible with a Holosun 507C?
- Yes, the slide is cut to the Trijicon RMR/Holosun 407C/507C footprint. It uses standard #6-32 mounting screws. Ensure you apply thread locker to the screws and torque to 12-15 in-lbs—over-torquing past 18 in-lbs risks stripping the aluminum threads in the slide.
- Can I upgrade to suppressor-height sights later?
- Yes, the dovetail follows the standard Glock .330" x 65-degree front and rear cut. I've fitted Dawson Precision and AmeriGlo GL-429 sights using a basic sight pusher. Remove the factory-installed Trijicons by driving them left-to-right with consistent pressure to avoid marring the slide.